SMPP v3.4

SMPP v3.4

For our customers that require low level control of SMS messaging and lowest possible latency we offer our Enhanced SMPP service

You need to reach out to our support team to get your SMPP server ip white listed to use this service.

This document provides a reference for all features available to you via the SMPP interface for sending SMS. SMPP is considered the industry standard for sending SMS to Network providers and is our native protocol.

The Short Message Peer-to-Peer (SMPP) is a protocol used by the telecommunications industry for exchanging SMS messages between Short Message Service Centers (SMSC) and/or External Short Messaging Entities (ESME).

The protocol is a level-7 TCP/IP protocol, which allows fast delivery of SMS messages. The most commonly used versions of SMPP are v3.3, the most widely supported standard, and v3.4, which adds transceiver support (single connections that can send and receive messages). Data exchange may be synchronous, where each peer must wait for a response for each PDU being sent, and asynchronous, where multiple requests can be issued in one go and acknowledged in a skew order by the other peer.

We support throughput up to 500 SMS/Sec, for that you can contact our support for further details.


SMPP Binding:

Description Value
Host smpp.easysendsms.com
Port 2777
Secured Port 2778
Username Your account username
Password Your account password
Mode TX / RX / TRX
Connections max 2 connections
Throughput 30/Sec. ( We support up to 500 SMS/Sec, contact our support for further details).
Dest TON

Unknown = 0
International = 1
National = 2
Network Specific = 3
Subscriber Number = 4
Alphanumeric = 5
Abbreviated = 6

DEST NPI


Unknown = 0
ISDN/telephone numbering plan (E163/E164) = 1
Data numbering plan (X.121) = 3
Telex numbering plan (F.69) = 4
Land Mobile (E.212) =6
National numbering plan = 8
Private numbering plan = 9
ERMES numbering plan (ETSI DE/PS 3 01-3) = 10
Internet (IP) = 13
WAP Client Id (to be defined by WAP Forum) = 18

If the sender address is alphanumeric (contains both letters and numbers) or non-numeric, TON is set to 5 and NPI to 0.
If the sender address is a short code, TON is set to 3, and NPI is set to 0.
If the sender starts with a “+”, TON is set to 1, and NPI is set to 1.
If the recipient starts with a “+”, TON is set to 1, and NPI is set to 1.
Otherwise, TON is set to 0 and NPI is set to 1.

Delivery Receipt Codes:

Code Description
0 Message sent
1 Failed message delivery
2 Message delivered
5 Failed message delivery

SMPP Error Codes

Hex Decimal Description Possible Solution

0x00000000

0

No Error

0x00000001

1

Message length is invalid

Max 140 octets; 160 chars in uncompressed default character encoding.

0x00000002

2

Command length is invalid

0x00000003

3

Invalid Command ID

0x00000004

4

Incorrect BIND Status for given command

You must bind first before any other request is handled.

0x00000005

5

ESME Already in Bound State

Do not send bind requests when already bound.

0x00000006

6

Invalid Priority Flag

0x00000007

7

Invalid Registered Delivery Flag

0x00000008

8

System Error

0x00000009

Reserved

0x0000000A

10

Invalid Source Address

0x0000000B

11

Invalid Dest Addr

Invalid length; the length was greater than 3 && less than 17, invalid international format.

0x0000000C

12

Message ID is invalid

0x0000000D

13

Bind Failed

0x0000000E

14

Invalid Password

0x0000000F

15

Invalid System ID

0x00000010

16

Reserved

0x00000011

17

Cancel SM Failed

0x00000012

Reserved

0x00000013

19

Replace SM Failed

0x00000014

20

Message Queue Full

0x00000015

21

Invalid Service Type

Set to NULL

0x00000016

Reserved thru -0x00000032

0x00000033

51

Invalid number of destinations

0x00000034

52

Invalid Distribution List name

0x00000035

53

Reserved thru -0x0000003F

0x00000040

64

Destination flag is invalid (submit_multi)

0x00000041

Reserved

0x00000042

66

Invalid submit with replace request; submit_sm with replace_if_present_flag set

0x00000043

67

Invalid esm_class field data

0x00000044

68

Cannot Submit to Distribution List

0x00000045

69

submit_sm or submit_multi failed

0x00000046

Reserved thru -0x00000047

0x00000048

72

Invalid Source address TON

Accepts International, Network, or Alphanumeric; values of 0x01, 0x03, and 0x05.

0x00000049

73

Invalid Source address NPI

Set to null for default value or 0x01 for ISDN numbering plan indicator.

0x00000050

80

Invalid Destination address TON

Accepts either Unknown Or International; values: 0x00 and 0x01

0x00000051

81

Invalid Destination address NPI

Accepts either Unknown Or ISDN E163/E164: values: 0x00 and 0x01.

0x00000052

Reserved

0x00000053

83

Invalid system_type field

0x00000054

84

Invalid replace_if_present flag.

0x00000055

85

Invalid number of messages

0x00000056

Reserved thru -0x00000057

0x00000058

88

Throttling error; ESME has exceeded allowed message limits.

0x00000059

89

Reserved thru -0x00000060

0x00000061

97

Invalid Scheduled Delivery Time

0x00000062

98

Invalid message validity period (Expiry time).

0x00000063

99

Predefined Message Invalid or Not Found

Does not support canned messages; set to NULL.

0x00000064

100

ESME Receiver Temporary App Error Code

0x00000065

101

ESME Receiver Permanent App Error Code

0x00000066

102

ESME Receiver Reject Message Error Code

0x00000067

103

query_sm request failed

0x00000068

104

Reserved thru -0x000000BF

0x000000C0

192

Error in the optional part of the PDU Body

0x000000C1

193

Optional Parameter not allowed

0x000000C2

194

Invalid Parameter Length

0x000000C3

195

Expected Optional Parameter missing.

0x000000C4

196

Invalid Optional Parameter Value

This error occurs when an optional value parameter retrieve fails; this not normal behavior.

0x000000FE

245

Delivery Failure, used for data_sm_resp

0x000000FF

255

Unknown Error

0x00000100

Reserved for SMPP extension thru -0x000003FF

0x0000012F

303

Country/Network not available

Integrate with an SMS API today.

Get Free 15 SMS Now....